The Hi 9813-6N water-proof multiparameter meter actions pH, electroconductivity (EC), and total dissolved solids (TDS), producing it suitable for created especially for agricultural applications these kinds of as hydroponics, greenhouses, farming and nurseries. The Hi 9813-6N comes with a Hi 1285-six blend probe with DIN connector and one m/three.three ft. cable, a starter set of calibration and cleaning remedy sachets, a examine remedy sachet, a 9V battery and instructions. The connected Hi 1285-six polyprolylene probe capabilities a fiber junction and gel electrolyte.

The meter has a calibration examine perform (Cal-Check out) to validate instrument functionality and an LCD display. If the meter is calibrated, a communication will indicate “Probe is Ok,” but if the meter wants cleaning the system will direct the user to “Clean Probe and Calibrate.”

The Hi 9813-6N tester functions in temperatures of . to sixty. degrees C, and has a array of pH . to 14. (+ or - .one pH) with a resolution of .one pH. For EC, the system has a array of .00 to four.00 mS/cm (+ or - 2% F.S. mS/cm) and a resolution of .01 mS/cm. For TDS, the system has a array of to 1999 ppm (mg/L) (+ or - 2% F.S. ppm) and a resolution of one ppm (mg/L). Measurements are 144.six x 79.5 x 37 mm/5.seven x three.one x one.5 inches (H x W x D) with a weight of 230 g (8.one oz.). (H is top, the vertical distance from lowest to highest level W is width, the horizontal distance from left to appropriate D is depth, the horizontal distance from entrance to back again.)

pH meters and testers evaluate the acidity or alkalinity of a material and are frequently utilized by scientists, suppliers, and hobbyists in aquaculture, agricultural, wine-producing and drinking water-testing and for scientific applications.

Hanna Instruments manufactures analytical instrumentation and materials, including pH meters, electrodes, chemical reagents, and buffer solutions. The organization, started in 1978 and headquartered in Woonsocket, RI, meets Worldwide Company for Standardization (ISO) 9001 requirements.

What’s in the Box?

• Hi 9813-6N meter
• Hi 1285-six blend probe with DIN connector and one m/three.three ft cable
• Hi 70007 pH seven.01 calibration remedy (20 mL)
• Hi 70442 1500 ppm (mg/L) calibration remedy (20 mL)
• Hi 70031 1413 µS/cm calibration remedy (20 mL)
• Two Hi 700521 cleaning remedy sachets (20 mL)
• Carrying situation
• (one) 9V battery
• Recommendations